Radio bezel set compatible with Ford KA RBT Bj.1996-2008 silver metallic with radio adapter ISO

Radio bezel set compatible with Ford KA RBT Bj.1996-2008 silver metallic with radio adapter ISO

SKU: TO24027S

GTIN: 4251013603702

WEEE: DE20797353

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

12,99 €

incl. VAT , plus

tomzz Audio

This / radio bezel / radio frame / mounting frame is compatible with:

Ford KA RBT 1996-2008

Color: silver metallic

Set contents: radio bezel, radio adapter cable

Note on the installation of the bezel:

To ensure optimum hold of the bezel in the radio slot, the metal slot of the car radio (usually included in the scope of delivery of the radio) must be inserted into the bezel. As many of the pre-punched tabs as possible should be bent over so that the radio has a tight fit. The enclosed black Bügel must be screwed to the back of the radio and then placed in the vehicle bay on the existing rail.

Description
Question about item

Radioblende / radio frame / mounting frame / adapter set 1DIN

compatible with Ford KA RBT 1996-2008

Color: silver metallic

Set contents: radio bezel, radio adapter cable

Note on the installation of the bezel

To ensure optimum hold of the bezel in the radio slot, the metal slot of the car radio (usually included with the radio) must be inserted into the bezel. As many of the pre-punched tabs as possible should be bent over so that the radio has a tight fit. The enclosed black Bügel must be screwed to the rear of the radio and then placed in the vehicle bay on the existing rail.

tomzz Radio bezels allow you to replace the original factory radio against higher quality headunits gängiger brands such as Alpine, Blaupunkt, Becker, Clarion, JVC, Kenwood, Sony, Pioneer or others. Factory radios usually have a shape adapted to the cockpit. Therefore, it is almost impossible to mount a standard ISO or double DIN radio in the vehicle slot. Using our radio bezels, a new radio can be installed in your vehicle without much effort. The installation is simple and can be done in a short time. Normally, for the installation of a radio in addition to the radio bezel other parts such as radio adapter cable, antenna adapter or CAN bus interface are needed. To continue to use the built-in steering wheel remote control, a steering wheel interface

is recommended

Material:	Kunststoff
Frame cutout:	1-DIN - 183x51mm
Car brand:	Ford
Article type:	Radioblenden

Contact data

First name

Last name

Company - optional

E-Mail

Question about item

Your question