Kärntener Str. 31 d
Nordrhein-Westfalen
Recklinghausen, Deutschland, 45659
info@tomzzaudio.de
https://www.tomzzaudio.de
TGT Vertriebs GmbH - WEEE-Nr. DE20797353
GTIN: | 4251013624714 |
HAN: | 2415-015 |
Category: | Ford |
Frame cutout: | 1-DIN - 183x51mm |
Car brand: | Ford |
Article type: | Radioblenden |
This / radio bezel / radio frame / mounting frame is compatible with
Ford KA RBT 1996-2008
Color: black
Note on the installation of the bezel
To ensure optimum hold of the bezel in the radio slot, the metal slot of the car radio (usually included with the radio) must be inserted into the bezel. As many of the pre-cut tabs as possible should be bent over so that the radio has a tight fit. The enclosed black Bügel must be screwed to the back of the radio and then placed in the vehicle slot on the existing rail.
Set contents : radio bezel, radio adapter cable, unlocking bügel, antenna adapter, installation shaft
tomzz Radio bezels allow you to replace the original factory radio against higher quality headunits gängiger brands such as Alpine, Blaupunkt, Becker, Clarion, JVC, Kenwood, Sony, Pioneer or others. Factory radios usually have a shape adapted to the cockpit. Therefore, it is almost impossible to mount a standard ISO or double DIN radio in the vehicle slot. Using our radio bezels, a new radio can be installed in your vehicle without much effort. The installation is simple and can be done in a short time. Normally, for the installation of a radio in addition to the radio bezel other parts such as radio adapter cable, antenna adapter or CAN bus interface are needed. To continue to use the built-in steering wheel remote control, a steering wheel interface