Radio bezel compatible with Ford KA RBT 1996-2008 blue-metallic

Radio bezel compatible with Ford KA RBT 1996-2008 blue-metallic

SKU: TO24026

GTIN: 4251013603672

WEEE: DE20797353

Available immediately
Delivery time approx. 1 - 3 Workdays (DE - int. shipments may differ)

10,99 €

incl. VAT ,

tomzz Audio

This /r radio bezel / radio frame / mounting frame is compatible with:

Ford KA RBT 1996-2008

Color: blue-metallic

Note on the installation of the bezel:

To ensure optimal hold of the bezel in the radio slot, the metal slot of the car radio (usually included in the scope of delivery of the radio) must be inserted into the bezel. As many of the pre-cut tabs as possible should be bent over so that the radio has a firm fit. The enclosed black Bügel must be screwed to the back of the radio and then placed in the vehicle slot on the existing rail.

This /r radio bezel / radio frame / mounting frame is compatible with:

Ford KA RBT 1996-2008

Color: blue-metallic

Note on the installation of the bezel

To ensure optimal hold of the bezel in the radio slot, the metal slot of the car radio (usually included in the scope of delivery of the radio) must be inserted into the bezel. As many of the pre-cut tabs as possible should be bent over so that the radio is firmly seated. The enclosed black Bügel must be screwed to the back of the radio and then placed in the vehicle slot on the existing rail

tomzz Radio bezels allow you to replace the original factory radio with higher quality headunits of common brands such as Alpine, Blaupunkt, Becker, Clarion, JVC, Kenwood, Sony, Pioneer or others. Factory radios usually have a shape adapted to the cockpit. Therefore it is almost impossible to mount a standard ISO or double DIN radio into the car slot. Using our radio bezels, a new radio can be installed in your vehicle without much effort. The installation is simple and can be done in a short time. Normally, for the installation of a radio in addition to the radio bezel other parts such as radio adapter cable, antenna adapter or CAN bus interface are needed. To continue to use the built-in steering wheel remote control, a steering wheel interface is recommended