Radio adapter cable ISO-ISO power loudspeaker with ON-OFF switch e.g. for Fiat Ducato motorhomes (radio on without ignition)

Radio adapter cable ISO-ISO power loudspeaker with ON-OFF switch e.g. for Fiat Ducato motorhomes (radio on without ignition)

SKU: 7000-028

GTIN: 4251013640837

WEEE: DE20797353

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

20,49 €

incl. VAT ,

tomzz Audio

Radio adapter cable ISO-ISO with ON/OFF switch, ISO coupling (F) to ISO plug (M)

For radio operation in motorhomes, boats or other vehicles with ISO connection. The radio can be switched on without ignition. Additional consumers are not activated.

Connection : Depending on the connection, the connected radio draws power from the car battery or from the body battery

Assignment of the ISO connector:
Pin 1: Not assigned
Pin 2: Not connected
Pin 3: Not assigned
Pin 4: Continuous plus (terminal 30)
Pin 5: Electrical antenna / remote
Pin 6: Lighting
Pin 7: Ignition plus (terminal 15)
Pin 8: Ground (terminal 31)

The loudspeaker cables are connected 1:1

Required installation opening for the switch: 20 mm

Cable length: Red/yellow 750mm / 75cm without the switch.

If your radio does not save the stations or settings after switching off the ignition, you can turn the ignition and continuous voltage. To do this, reconnect the two plugs (YELLOW to RED / RED to YELLOW) from terminal 15/PIN 4 (ignition plus +12V) and terminal 30/PIN 7 (continuous plus +12V)

Radio adapter cable ISO-ISO with ON/OFF switch, ISO coupling (F) to ISO plug (M)

For radio operation in motorhomes or other vehicles with ISO connection. The radio can be switched on without ignition. Additional consumers are not activated.

Connection : Depending on the connection, the connected radio draws power from the car battery or from the body battery

Assignment of the ISO connector:
Pin 1: Not assigned
Pin 2: Not connected
Pin 3: Not assigned
Pin 4: Continuous plus (terminal 30)
Pin 5: Electrical antenna / remote
Pin 6: Lighting
Pin 7: Ignition plus (terminal 15)
Pin 8: Ground (terminal 31

The loudspeaker cables are connected 1:1

Required installation opening for the switch: 20 m

Cable length: red/yellow 750mm / 75cm without the switch

If your radio does not save the stations or settings after switching off the ignition, you can turn the ignition and continuous voltage. To do this, reconnect the two plugs (YELLOW to RED / RED to YELLOW) from terminal 15/PIN 4 (ignition plus +12V) and terminal 30/PIN 7 (continuous plus +12V)